How To Repot Succulents The Complete Guide
Last Updated on July 8, 2023
Succulents are one of the most popular houseplants because they’re easy to care for and look great. If you have a succulent that’s getting too big for its pot, it’s time to repot it. This can seem daunting, but with our complete guide, you’ll be a pro in no time!
How and When To Repot Your Succulents In 3 Easy Steps | Tips for Beginners
- Choose a new pot that is only slightly larger than the current one
- This will help reduce stress on the plant as it adjusts to its new home
- Add fresh, well-draining succulent soil to the new pot
- Use your fingers to lightly loosen the roots of the plant before placing it in the soil
- Water your succulent thoroughly, making sure to saturate the soil completely
- Allow the plant to drain for a few minutes before putting it back in its pot
- Place your succulent in a bright location out of direct sunlight and wait for it to adjust to its new home before watering again
Repotting Succulent Arrangements
If your succulent arrangement is looking a little worse for the wear, it might be time to repot it. Here’s everything you need to know about repotting succulents, from choosing the right pot to getting the plants themselves out of their current home.
Choosing a Pot
The first step in repotting your succulents is to choose a new pot. If you’re just moving your plants up one size (for example, from a 4″ pot to a 6″ pot), you can use any type of pot that you like. However, if you’re moving your plants up more than one size or if they’re currently in a plastic pot, it’s best to use a terracotta or clay pot.
These materials allow the roots to breathe and prevent them from becoming waterlogged.
Getting the Plants Out of Their Current Pot
Once you’ve chosen a new pot, it’s time to get your plants out of their current home.
Start by gently tapping the sides and bottom of the pot until the plant loosens and falls out. If the plant doesn’t budge, run a butter knife around the edge of the container to loosen things up. Once the plant is out, inspect its roots and remove any that are dead or damaged.
Finally, give the plant a good rinse with lukewarm water before placing it in its new home.
How to Repot Succulents That are Too Tall
Your succulent is growing too tall and starting to fall over. What do you do? The best solution is to repot the plant in a pot that is one size larger.
This will give the roots room to grow and support the plant.
Here are the steps to take when repotting a succulent that is too tall:
1. Choose a pot that is one size larger than the current pot.
Make sure there are drainage holes in the bottom of the new pot.
2. Add fresh succulent soil to the new pot. You can find this at your local garden center or online.
3. Gently remove your succulent from its current pot, being careful not to damage the roots. Place it in the center of the new pot and fill in around it with more soil, tamping it down gently so that it’s secure.
4. Water your succulent well, making sure not to overwater (this can lead to root rot).
Allow it to drain completely before putting it back in its spot indoors or out.
How to Repot Succulent Cuttings
If you’re anything like me, you love succulents. They are easy to care for and make a great addition to any indoor or outdoor space. But what do you do when your succulent starts to outgrow its pot?
It’s time to repot! Here’s how:
1. Choose a new pot that is slightly larger than the current one.
Be sure to use a well-draining potting mix designed for succulents.
2. Gently remove your succulent from its current pot. If the roots are bound, loosen them with your fingers before transplanting into the new pot.
3. Fill in around the roots with the potting mix, gently pressing it down as you go. Water well and place in a bright spot out of direct sunlight until new growth appears.
How to Repot Echeveria
If your Echeveria is looking a little cramped in its current pot, it might be time for a repot. Here’s how to do it:
1. Choose a new pot that is only slightly larger than the current one.
You don’t want to shock your plant with too much extra space.
2. Prepare the new pot by adding fresh potting mix and making sure there are drainage holes in the bottom.
3. Gently remove your Echeveria from its current pot, being careful not to damage the roots.
4. Place the plant in the new pot and fill in around it with fresh potting mix. Water well and allow the excess water to drain away completely before putting the pot back in its place.
How Long After Repotting Succulents Can I Water
When it comes to succulents, the main rule of thumb is to let the soil dry out completely before watering again. However, this can vary depending on the type of succulent you have. If you’re not sure when to water your succulent, it’s always best to err on the side of caution and wait a few extra days.
If you just repotted your succulent, give it some time to adjust to its new environment before watering it. Depending on the size of the pot and the type of succulent, this could take anywhere from a few days to a couple of weeks. Once your succulent has settled in, start by watering it once every 7-10 days.
Again, be sure to let the soil dry out completely between waterings.
If you notice that your succulent is starting to look wilted or wrinkled, that’s usually a sign that it needs more water. In general, most succulents can handle being watered every 5-7 days during hot summer months.
Just be sure to check the soil first – if it’s still damp, wait another day or two before watering again.
Credit: succulentcity.com
How Do You Repot a Succulent for Beginners?
If you’re new to succulents, the thought of repotting one might be a little daunting. Have no fear! We’ll walk you through the process step-by-step so that you can get your succulent happily settled into its new home in no time.
First, gather your supplies. You’ll need a pot with drainage holes, some fresh potting mix, and a sharp knife or pair of scissors. It’s also helpful to have some gloves on hand to keep your hands clean and protected from the cacti spines.
Next, gently remove your succulent from its current pot. If it’s roots are tightly bound, you may need to use the knife or scissors to loosen them up a bit. Once it’s free, shake off any excess dirt and inspect the roots for signs of rot or pests.
Trim away any affected areas with the knife or scissors.
Now it’s time to add some fresh potting mix to the new pot. Make sure there is enough room for the roots to spread out before adding your succulent plant.
Gently lower it into the pot and backfill around it with more potting mix until it’s snugly in place. Tamp down lightly with your fingers to secure it.
Water well immediately after repotting, making sure not to overwater (which can lead to root rot).
Allow the soil to dry out completely between waterings thereafter. Your succulent should acclimate quickly to its new home and continue growing happily for years to come!
Should I Air Dry Succulents before Repotting?
If you’re thinking about repotting your succulents, you might be wondering if you need to air dry them first. The answer is: it depends. If the plant is rootbound (that is, the roots are tightly packed and there’s little room for them to grow), then it’s a good idea to air dry the roots before repotting.
This will help the plant absorb water more easily and encourage new growth. On the other hand, if the plant isn’t rootbound, there’s no need to air dry it first. Just go ahead and repot as usual.
What Do You Put in the Bottom of a Planter for Succulents?
There are a few things you can put in the bottom of a planter for succulents. The most important thing is to make sure that the drainage holes in the bottom of the planter are not blocked. If they are, water will build up in the bottom of the planter and your succulents will rot.
You can line the bottom of the planter with pebbles, gravel, or rocks. This will help to keep the drainage holes clear and also help to aerate the soil. Another option is to use a layer of chicken wire or hardware cloth.
This will also help with drainage and aeration while keeping critters out.
How Do You Repot a Succulent After Buying It?
When you buy a succulent, it is important to repot it as soon as possible. This will help the plant to acclimate to its new environment and start to grow. Here are the steps to repot a succulent:
1. Choose a pot that is slightly larger than the one the plant is currently in. The new pot should have drainage holes in the bottom.
2. Remove the plant from its current pot and gently loosen any roots that are compacted.
3. Place the plant in the new pot and fill around it with fresh potting mix designed for cacti and succulents. Water well after planting.
4. Place the potted plant in an area that receives bright light but not direct sun.
Can I Repot My Ice Plants Succulent Using the Same Method as Other Succulents?
Caring for ice plant succulents may require a different repotting method compared to other succulents. It is recommended to use a well-draining soil mix suitable for succulents and ensure proper sunlight exposure. However, specific repotting techniques for ice plant succulents may vary.
Conclusion
If you’re like me, you probably have a few succulents around your house. And if you’re like me, you probably forget to water them as often as you should. But don’t worry, I’m here to help.
In this blog post, I’m going to show you how to repot succulents so they can thrive even when you forget to water them.
First things first: what kind of pot should you use? Well, it needs to be deep enough that the roots can grow without being cramped, and it needs to have drainage holes in the bottom so the water can drain out.
I like to use plastic pots because they’re lightweight and inexpensive, but ceramic or terracotta pots would work just as well.
Once you’ve got your pot, it’s time to start prepping your succulent for its new home. Gently remove the plant from its current pot and shake off any excess dirt from the roots.
If the roots are particularly compacted, you can gently loosen them with your fingers before replanting.
Next, add some drainage material to the bottom of your new pot. This could be something like gravel or perlite.
Then, fill the pot with a high-quality succulent soil mix . Once your plant is in its new home , give it a good watering and place it in a bright spot out of direct sunlight . And that’s it!
With just a little bit of TLC , your succulent will soon be thriving in its new home .
